17.4.1.1 The One-Way ANOVA Dialog Box
This dialog can be used to carry out one-way repeated measures ANOVA analysis. To open this dialog, select Statistics:ANOVA:One-Way ANOVA from Origin menu.
Contents
Supporting Information
- Introduction: One, Two and Three-Way ANOVA
- Algorithms: One-Way ANOVA
- Interpreting Results of ANOVA
- Tutorial: One-Way ANOVA
Recalculate
| Recalculate |
Controls recalculation of analysis results
For more information, see: Recalculating Analysis Results |
|---|
Input
Set the drop-down list to Raw or Indexed.
| Indexed | In this mode, one column contains levels of the factor variable and the corresponding response data are in another column.
Factor
Data
|
|---|---|
| Raw | In this mode, response data from each level of the factor variable are stored in a separate column
Factor
Data |
Descriptive Statistics
Check to include descriptive statistics results in the output report.
Effect Size
Specify whether to output the Effect Size table in the report sheet. In the report table, it will output the Effect Size metrics for One Way ANOVA: Eta-squared, Cohen's f and Omega-squared. They are all standardized effect size statistics used in ANOVA to quantify the magnitude of group differences.
Eta-squared and Omega-squared are variance-explained metrics, and Cohen's f is standardized mean difference metric.
Significance Level
Set the significance level for one-way ANOVA.
Equal Variance Assumed
This option is checked by default. It will effect the methods supplied in the Mean Comparison tab.
While standard ANOVA assumes that all comparison groups have equal variance, Welch's ANOVA is an alternative to the standard One-Way ANOVA, for situations where the assumption of homogeneity of variances is violated. It uses weighted group variances to adjust the degrees of freedom, keeping the Type I error rate stable even when variances and sample sizes differ significantly across groups.
- When this option is selected, it will output the Overall ANOVA report table. And it supplies Tukey, Dunnett, Bonferroni, Dunn-Sidak, Fisher LSD, Scheffe, Holm-Bonferroni and Holm-Sidak mean comparison methods.
- When this option is unselected, it will output the Welch's Test report table. And it supplies Games-Howell mean comparison method. Also, for the Summary Graph of the result sheet, the P value is based on p of Welch's ANOVA, and Comparison Intervals of Mean is based on Games-Howell method.
Means Comparison
Choose methods of post-hoc pairwise comparisons:
| Significance Level | Specify the significance level for pairwise means comparison. |
|---|---|
| Compare |
|
| Control Level | Specify the control level when compare means. This option is available when the Each Mean with a Control is selected in Compare.
For example, there are three levels (groups) A, B and C in the sample, and specify the control level to A, then B and C will compare with A respectively, but B and C will not be compared with each other. |
| Tukey |
Different methods for means comparison. When Equal Variance Assumed is selected in the Input tab, it supplies these methods for pairwise means comparison. If select All Pair of Means in Compare, it will supply Tukey method. If select Each Mean with a Control in Compare, it will supply Dunnett method. Other method are supplied in both option. (For more information see Algorithms). |
| Dunnett | |
| Bonferroni | |
| Dunn-Sidak | |
| Fisher LSD | |
| Scheffe | |
| Holm-Bonferroni | |
| Holm-Sidak | |
| Game-Howell | When Equal Variance Assumed is un-checked in the Input tab, it supplies Game-Howell methods for pairwise means comparison.
(For more information see Algorithms). |
| Grouping Letters Table | Showed difference of mean value with letters. Same letter means no significant difference, while different letter mean significant difference between two groups. |
Tests for Equal Variance
Choose test methods for homogeneity of variance.
| Significance Level | Specify the significance level for equal variance tests. |
|---|---|
| Levene | | |
Different methods for equal variance test. (For more information see Algorithms). |
| Levene ()^2 | |
| Brown-Forsythe |
Power Analysis
Choose to perform power analysis:
Unset Minimal Difference of Interest
| Difference(s) for Specified Power | When Minimal Difference of Interest is not set, this option is available.
Output the differences for the specified power levels. When this option is selected, the specified power levels setting will affect the power level in power curve. |
|---|---|
| Power Level(s) | When check the Difference(s) for Specified Power option, you can enter the power levels separated by space in this edit box. Default power levels are 60%, 70%, 80% and 90%. |
Set Minimal Difference of Interest
| Minimal Difference of Interest | Specify the minimum difference you are interested in. Once you enter a value in this box, the Power Analysis graph will show the minimum sample size to detect this difference in the different powers. |
|---|---|
| Sample Size(s) for Specified Power | When check the Minimal Difference of Interest option, this option is available.
Output the Sample Sizes for the specified power levels. When this option is selected, the specified power levels setting will affect the power level in power curve. If it is selected, it will use the default power levels. |
| Power Level(s) | When check the Sample Size(s) for Specified Power option, you can enter the target power levels separated by space in this edit box. Default power levels are 60%, 70%, 80% and 90%. |
| Power Based on Test Data | When specify the Minimal Difference of Interest, this option is available.
Compute the power for the sample size of the test data. (the probability of rejecting the null hypothesis when it is false). |
| Hypothetical Power | When specify the Minimal Difference of Interest, this option is available.
Compute the power of the test at various sample sizes. When check this option, it will add corresponding curve to power curve. |
| Hypothetical Sample Size(s) | When specify the Minimal Difference of Interest and Hypothetical Power is checked, this option is available.
Specify hypothetical sample size(s) for power computation. |
Output
| Graphical Summary Report | Specify whether to display the graphical summary report |
|---|---|
| Mean Comparison Method used in Report | When Graphical Summary Report is checked and Equal Variance Assumed(in Input tab) is checked, this option is available. Select the method for comparison intervals of mean.
When Graphical Summary Report is checked, this option is not shown. The method for comparison intervals of mean is Games-Howell. |
| Graph Diagnostic Report | Specify whether to display diagnostic report.
If the Graphical Summary Report display, it will show at the at the graph node after summary report. If Graphical Summary Report does not display, it will show at the first graph node. The sample size effects the plots type of Distribution of Data in the left panel.
|
| Graphical Power Analysis Report | Specify whether to display the graphical Power Analysis report. The power curve shows how the statistical power of the test changes as the difference in proportions varies. Power is the probability of rejecting the null hypothesis when the true difference differs from 0. |
| Graph Arrangement |
Arrange Graphs into Columns
Arrange Plots of Same Type in One Graph
|
| Report Tables | Specifies the destination of report worksheet tables.
Book
Sheet
Result Log
Script Window
Notes Window
|
| Plot Data | Specifies the destination to output the data for plots (you must select a Plots option, below).
Book
Sheet
|
| Optional Report Tables | Specifies whether to include additional tables in report worksheet.
Notes
Input Data
Masked Data
Missing Data
|
Plots
| Bar Chart |
Specifies whether to generate the plot in the report sheet. Note: If the Factor column is Set as Categorical, then the output graph will be plotted according to the categorical order customized through (Column Properties) Categories tab from Factor column. |
|---|---|
| Box Chart | |
| Means Plot (SD as Error) | |
| Means Plot (SE as Error) | |
| Means Comparison Plot | This is only available when post-hoc pairwise comparisons will be performed.(controlled in Means Comparison tree node).
Specifies whether to output means comparison plot(s) for all selected method(s). |
| Residual Plot | Residual Plot is used to check if the assumptions for analysis of variance are met. That means to check whether the residuals are normally distributed and have constant variance. Here, Origin shows four types of plots:
|